If the hinge is fine but I just want to swap a rear triangle, is it just a case of replacing the two bolts with a dab of thread lock, or will the spindle need replacing?
If you use the heat up, melt loctite method, you can clean with wire brush a little and refit with fresh loctite.
Or gimme an email and I’ll send you some fresh bolts.
@sbbohr started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
If the hinge is fine but I just want to swap a rear triangle, is it just a case of replacing the two bolts with a dab of thread lock, or will the spindle need replacing?