You are reading a single comment by @spenceey and its replies.
Click here to read the full conversation.
spenceey-
Yeah - that's the point. Guy's straight-up copied me from a post on reddit :'), though he's refined the design with mitred corners.
No plans, made it up on the hoof ish. Build from a single sheet of 18mm birch ply. It's the width of the sheet so 2440mm and about 300mm high / deep. Made it to fit the existing equipment like Xbox / sky Q box.
Mine also has digital fans which measure the internal temp and suck hot air out on the side whilst drawing cool air in through the bottom, using positive pressure when the Xbox gets too warm.
Soul
Yes; built the whole thing from scratch myself.
Cleats are attached to dot & dab plasterboard walls so no screwing into studs. I fixed mine with hollow wall anchors which were rated for 50Kg each.