You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
PhilDAS
@M_V
And with the end pulled out to 120mm you can see the stays start to come away from the tangs on the inside.
Thinking if I’m holding the ends out where I need them before brazing then it might be better to use brass as it’ll fill the gaps better? Suspect it’d still need some cold setting too.
1 Attachment