the shelves are glued and screwed with 40mm screws, so should hold together
they are then screwed down on to the battens from above (6 screws in total)
i might add another batten or a couple of brackets at the bottom, for peace of mind as much as anything
Sounds good, but my main concern is that you're using 50mm screws to go through a 20mm batten and then plaster, which means that you're not very far into the brick.
@moocher started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
the shelves are glued and screwed with 40mm screws, so should hold together
they are then screwed down on to the battens from above (6 screws in total)
i might add another batten or a couple of brackets at the bottom, for peace of mind as much as anything