3 batons of 20mm x 30mm each with 3 50mm screws through into rawl plugs in a brick wall
Shelves. Pine, 20mm thick boards, 130mm deep. I could probably weigh it. Will be used for glass jars filled with dry goods.
Is it going to collapse? Should I add more batons underneath one of the lower shelves?
I’d always have a batten at the bottom, simply to rely on compression rather than tension (sitting on something vs hanging off something).
@Nef started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
3 batons of 20mm x 30mm each with 3 50mm screws through into rawl plugs in a brick wall
Shelves. Pine, 20mm thick boards, 130mm deep. I could probably weigh it. Will be used for glass jars filled with dry goods.
Is it going to collapse? Should I add more batons underneath one of the lower shelves?