You are reading a single comment by @djc and its replies.
Click here to read the full conversation.
-
Looks like the top cap is pinched between the bolt and the bit of the bung?
When you reassemble, check the bung is right down into the steerer (often they aren’t tightened up enough and then when you try and preload the headset it just pulls the bung out the steerer a bit) and add a spacer if required.
M_V
@djc
I was swapping out a new stem and have run into an issue with the headset. I know nothing very little about headsets so apologies in advance for any incorrect terms..
I think I may have overtightened the bolt when putting the top cap back on, it didn't feel right so I unscrewed to remove it and it came attached to (what I think is) the expander plug? I can't unscrew it all but can see the end of the bolt coming out.
Any suggestions? It's an integrated Campagnolo Chorus Hiddenset 1 1/8"