You are reading a single comment by @mbretton and its replies. Click here to read the full conversation.
  • The seat looks from the pictures to be quite nose down.

    Also is it high enough? You’ll find that most people ride with more seatpost showing, you can find some guides to Simple bike fit on YouTube. If you can’t raise your saddle more than it is now then it’s likely that the frame is too big for you in general (too long)

    If you’re considering bullhorn bars then you’ll likely need new brake levers if/when you switch to those, either “aero” ones that go in the end of the bar or ones that clamp in the centre of the bar next to the stem. (Personally I’d keep the risers)

  • @hp93 Thanks for your message!

    I ordered the attached handlebars in the end. Ideally I'd want brake levers that clamp in the centre of the bar - are these easy to find? Any you can link me to or suggest?

    Thanks


    1 Attachment

    • Screenshot 2020-06-29 at 13.03.17.png
  • The diameter of the central fat piece needs to match the diameter of your headset, where it's held, to the mm.

    It looks like the rest of the central part tapers which makes it unsuitable to position a break lever there.

About

Avatar for mbretton @mbretton started