You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Lolo
@M_V
Stuck the SQR and rack I made on my commuter which has an in-line post and popped up to my folks to collect a parcel and some clamps my dad was getting rid of.
Little bit of bum contact, mostly track standing at lights. Would be worse on a set back post. No thigh contact.
Dropped a couple of those big bus stop kerbs and then dropped the rear rend from a couple feet back at the garage. I think the kerb drops bent it slightly and then the big drops at the garage did some real damage but not where I expected. The single bar where the top straps attach is fine.
This tubing measures about 7mm od x 0.6mm wall thickness. Thinking about ordering some 8mm x 1mm and trying again.
Bag and load weighed in at 3kg.
2 Attachments