-
I’ve got a working cable for the rear but have attempted to solder the front mech wire 4 times and it’s not moving... I’ve used a legit cable and tested the front mech is working and battery charged...
Have you checked the firmware is up to date across the components? I've had situations before where everything is plugged in and the battery is charged but it won't work until the firmware is brought up to date using the etube software.
andyp-
Not sure, never had to plug any of my stuff into a computer - when I use a legit front mech cable with the rest as I’ve set it up it all works, when I plug in the front mech cable I’ve soldered then nothing happens... pretty sure it’s because I’m shit at it and was lucky the first two times on the other cable... cheers for the info though 👍🏻👍🏻
mattyc
I’ve got a working cable for the rear but have attempted to solder the front mech wire 4 times and it’s not moving... I’ve used a legit cable and tested the front mech is working and battery charged... I chatted to my neighbour as he’s an electrician and restores speakers and he’s said he’s certain I’m being a muppet and he’ll sort it one evening this week so fingers crossed I’ll be finishing this (with temporary wheels) this weekend! 🎉
Need to order some spokes to get the oxic wheels built up - I’ve just remember I’ve got a pair of Vittoria corsa speed in the garage in 23mm - my question is should I bother trying tubeless on the new wheels or just stick to what I know and keep with tubes?