Home DIY

You are reading a single comment by @withered_preacher and its replies. Click here to read the full conversation.

•

fizzy.bleach in reply to @withered_preacher

i ended up getting the UJK micro one from Axminster. £20 for the jig and TWENTY MORE KWID for the drill bit(!!!!!!). the bit is 9.5mm thick so i'm slightly worried

•

withered_preacher in reply to @fizzy.bleach

Hopefully the angle will ameliorate the bit thickness in thinner material - is that what you mean?

•

fizzy.bleach in reply to @withered_preacher

I guess I mean that you have the bit at a very low angle with 0.75mm wiggle room either side. If you don't stop it accurately depth-wise, I feel there's a big chance of blowing out at the bottom

About

Avatar for withered_preacher @withered_preacher started