You are reading a single comment by @mattyc and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@mattyc
Hi all, can someone help me with spoke calcs? my brain is not working...
I've got some of the PPINA Bitex (Powerway R13)
Measurements from @MCamb as below -
Rear hub
spoke hole distance
Drive side: 50mm
Non- drive side: 38mm
W: 55mm
X: 28mm
Y: 47mm
H: 65mm
Offset
L: 37mm
R: 18mm
Spoke hole diameter 2.2mm
~~~~~~~~~~~~~~~~~
Front hub
spoke hole distance
Drive side: 30mm
Non- drive side: 30mm
Offset
L: 33mm
R: 33mm
The rims are DT Swiss OXIC 21mm (same as RR411 rims with asymmetric rear rim)
I'm after silver spokes and these DB ACI ones seem like great value
https://www.cyclebasket.com/m9b0s454p979/ACI_Alpina_Stainless_Steel_DB_Spokes_Silver_Singles_
I'll post beer/wine/coffee/cake to whomever can help me out!
Cheers in advance
Matt