So I got a bit carried away with myself before and during Lockdown and decided to do a bit of a no holes barred steel road bike build.
The thing is incredible, and the ride is sublime, it only weighed 6.4kg, was mind blowingly fast to pick up yet unfathomably comfortable, but I just dont need 2 road bikes and i know this is going to be an ornament so id rather sell on for someone to get good use out of.
Ill do detailed pictures if necessary but the components are less than 120kms old (other than the lightweights - circa 1000kms) and theres not a mark on them other than from the minimal use theyve had on 2 rides.
Theres a slight mark on the frame by the drive side chainstay and bottom bracket thanks to me managing to out-power an aging THM Clavicula cranset and drop the chain, but other than that mild cosmetic the frame is as new.
Frame is a custom geometry with a slightly taller head tube, but other than increased stack its a 54cm geometry and with the set up pictured below rode as any of my other OTP 54cm compact geo frames with approx 20mm of spacer.
Its also got custom internal cable routing to the rear, a custom paint finish, and is an eTap only frame meaning no holes for Di2 or stops for mechanical.
Its also got a custom head badge.
All in all about $4000 worth of custom frame from what i can gather.
So I got a bit carried away with myself before and during Lockdown and decided to do a bit of a no holes barred steel road bike build.
The thing is incredible, and the ride is sublime, it only weighed 6.4kg, was mind blowingly fast to pick up yet unfathomably comfortable, but I just dont need 2 road bikes and i know this is going to be an ornament so id rather sell on for someone to get good use out of.
Ill do detailed pictures if necessary but the components are less than 120kms old (other than the lightweights - circa 1000kms) and theres not a mark on them other than from the minimal use theyve had on 2 rides.
Theres a slight mark on the frame by the drive side chainstay and bottom bracket thanks to me managing to out-power an aging THM Clavicula cranset and drop the chain, but other than that mild cosmetic the frame is as new.
Frame is a custom geometry with a slightly taller head tube, but other than increased stack its a 54cm geometry and with the set up pictured below rode as any of my other OTP 54cm compact geo frames with approx 20mm of spacer.
Its also got custom internal cable routing to the rear, a custom paint finish, and is an eTap only frame meaning no holes for Di2 or stops for mechanical.
Its also got a custom head badge.
All in all about $4000 worth of custom frame from what i can gather.
https://www.stinnerframeworks.com/gibraltar-2017
Id really like collection only, particularly the frame, but i'll consider posting fully insured, tracked and signed for if it comes to it.
Please follow up any dibs with a PM and all questions via PM please
I'll listen to sensible offers, sensible, and always willing to hear offers on multiple items
All parts other than the frame and wheels have their original boxes