The crank set I think I MTB. Is a chineseone as it was the only one fulfilling my requirements(40/26T). Shifting looks good and, as much as I measured, I need a 3mm spacer on non drive side and 2mm on the other.
If of any help the BB is RS500.
BB RS500 is a road bottom bracket. It won’t work with mtb cranks regardless of the shell width.
With Shimano mtb ht2 bottom brackets you run 3 spacers for a 68mm shell, 1 for a 73mm shell so the plastic spacer always matches up.
@M_V started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
The crank set I think I MTB. Is a chineseone as it was the only one fulfilling my requirements(40/26T). Shifting looks good and, as much as I measured, I need a 3mm spacer on non drive side and 2mm on the other.
If of any help the BB is RS500.