Wheelbuilding / Wheel Building / Wheel build help

You are reading a single comment by @Skülly and its replies. Click here to read the full conversation.

•

Po

Rebuilding a stock front wheel from a Boardman CXR for a friend after he put a motorcycle tyre lever through the spoke bed. Fairly sure the rim is an offset Kinlin XR22T. I’ve measured the ERD at 599 vs 596 (from cycleclinic). Width and depth are all within 1mm. Can I get away with reusing the spokes?

•

Skülly in reply to @Po

Rebuilding a stock front wheel from a Boardman CXR for a friend after he put a motorcycle tyre lever through the spoke bed. Fairly sure the rim is an offset Kinlin XR22T. I’ve measured the ERD at 599 vs 596 (from cycleclinic). Width and depth are all within 1mm. Can I get away with reusing the spokes?

I'd give it a try.

•

Po in reply to @Skülly

This was a success.

Not used Kinlin rims before - very impressed. Open Pros I’m building next look agricultural by comparison.

About

Avatar for Skülly @Skülly started