You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
M_V
I did this and it worked okay.
I did have to re-do one dropout on the fork as it just had that slight cross thread feel. I hadn't used the biggest diameter tube that would fit in the axle recess shoulder (I don't know what to call that little lip that the hub sits on while you put the axle in). I did again with a bigger tube and all good. I reckon use the biggest tube you can fit in there for the most rigidity/best chance of square.