You are reading a single comment by @veLLo and its replies.
Click here to read the full conversation.
-
What kind of maximum (under floor board) cable length is it acceptable to have?
For 8Ω speakers, you'd presumably want to keep the wire resistance down to under 0.8Ω on the AvE basis of being able to pull 10% out of any voltage without serious consequences, which equates to around 50m cable length in the common 79/0.2mm speaker wire.
The cable resistance might start to become a material element in any RC low-pass filter in your crossover, but unless you have a much bigger house than we're imagining, that's going to lower your cut-off frequency by an insignificant margin once you're down to cable runs in the 10m range.
gbj_tester
@veLLo
Hi HiFi lovers!
Due to dangerous 3 years old in the house, there's no vinyl playing facility in our living room but I could fit speakers somewhere and link them to the system in adjacent room, using the "B" speaker output of the amp.
What kind of maximum (under floor board) cable length is it acceptable to have? I reckon I'd need 12 meters.
1 Attachment