-
In that location I would use some good quality double sided tape like gorilla and mount it more under the tube without the tie wrap if you want the clean look.
https://cpc.farnell.com/gorilla-tape/3044101/double-sided-mounting-tape-25mmx1/dp/SA03358?mckv=s5fjteh6F_dc|pcrid|224653346133|kword||match||plid||slid||product|SA03358|pgrid|50784644841|ptaid|pla-896721473021|&CMP=KNC-GUK-CPC-SHOPPING&gclid=EAIaIQobChMIws76pJOa6QIVhLTtCh1evAJwEAQYAiABEgLXd_D_BwEAnother option I have also used is a more decorated variety. I have one of these under my BB shell as a hidden easter egg for keen eyed mechanics. https://www.martysreliable.com/product/dirty-dog-skull-cable-guides-243087-1.htm
-
Bit late reply i realise, but I did this, on balance pretty pleased with end result, depends how much bodging you're up for.
Drilled hole in the cable guide, then bigger hole to seat a cable ferrule, then clear sprayed. Had some ferrules which had a solid end so I could file down to smaller diameter to fit in the small hole. Found that because i just used hand held drill and normal drill bit that ferrule didn't quite seat right so ended up using a supporting cable tie to tuck it nicely.
Frame is 95 rockhopper.
You are reading a single comment by @Haggis and its replies.
Click here to read the full conversation.
yafe
44two
@Haggis
Anyone had a similar issue and solved it with a better looking solution?
1 Attachment