You are reading a single comment by @danb and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
hippy
@danb
The composition if the watt may be different though.
300w at 90rpm requires an #average# torque of 31.83N.m
But that same 300w at 90rpm could also be achieved by 63.66N.m for half of a rpm and 0N.m for the other half for example or any other ratio which averaged out to 31.83N.m over a revolution.