You are reading a single comment by @Airhead and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
NotThamesWater
@Airhead
Sometimes it's enough to hammer a cross head in there and turn until you get enough of the screw head to put some pump pliers on. If you do cut it with the Dremel disc remember to wear safety squints.
Worst case, use a drill to remove the heads, cut the remaining screw out and dowel.