You are reading a single comment by @SasenFrAsen and its replies. Click here to read the full conversation.
  • P.S IIRC there were two types of Octalink BB, one with short splines and one with long splines. You might want to measure the length of the splines on the cranks. I'm not an expert on Octalink by any means, however, so someone else may have some more detailed advice.

  • This sums it up fairly good

    To be honest I don't understand why they didn't arrive at ISIS directly, maybe there's some engineering point with the shallow edges?


    1 Attachment

    • bbsx4-labeled.jpg
  • I don't understand why they didn't arrive at ISIS directly

    Octalink was a Shimano proprietary product. ISIS was a response from a few other players to offer a similar axle without paying licensing fees. Shimano continued to produce Octalink up to Claris 2400 at least, long after ISIS was abandoned as a mainstream product.

    Shimano got it wrong in v1 in terms of MTB use; while the short splines are OK for pedalling forces, they tend to strip out the cranks when people land jumps

  • @danstuff and @SasenFrAsen
    Thank you for the invite down a rabbit hole.

    I'll get out the measuring devices tomorrow.

About

Avatar for SasenFrAsen @SasenFrAsen started