-
I’ve just used a standard 3 way toggle switch I got from Maplin (RIP) that was designed for small electronics projects. Wired up to lights and charger and currently attached to a small battery bag under my top tube. This goes to a usb hub rather than cache battery however.
I’ve also seen variations of this method mounted into a bar end, which looked really neat. Can’t find a photo now however, but I’m sure you get the idea.
C4r1s-
Some Spec Awols were set up with switches in bar end plugs.
-
I have solved my problem in a needlessly expensive and complex fashion (I have time on my hands). I'm getting those dyna-snap magnetic connectors so I can remove the bulky switch from the set up when I'm not doing multi-day rides. I just need to bodge a velcro strap for the switch to replace the zip ties. And to make it more complex and time consuming I might try and get a new 3d printed case for the switch.
Eeyorecore
Lanterne_Rouge
Yes is does but I wanted switching before the lights
Lights: SP PL-8X > Kemo M-172N (Switch)> Son Edelux II Front and Son Post Mount Rear
or
USB: SP PL-8X > Kemo M-172N (Switch)> > cache battery > USB Device
It works well it's just that the Kemo switch is massive