Tool library / tool exchange. Post what you got and where you are

Anyone got a crown race setter that would work for 1.25" diameter? Near SE24.

Anyone south of the river have a torque wrench avaliable to borrow this Saturday for a few beers, got a stem and Crankset I need to install

Got a Bontrager one with 5NM preset.

One of these: https://www.trekbikes.com/gb/en_GB/equipment/cycling-accessories/bike-tools-maintenance/bontrager-preset-torque-wrench/p/08370/

Got a Bontrager one with 5NM preset.

One of these: https://www.trekbikes.com/gb/en_GB/equipment/cycling-accessories/bike-tools-maintenance/bontrager-preset-torque-wrench/p/08370/

Pickup SE1.

Anyone have a VAX carpet cleaner/washer?

Anyone (preferably in SE) have a dura ace bottom bracket 7700 tool set I could borrow? (would buy too if you're interested in selling) I think the TL-FC31 is the only one I need.

1 Attachment

It’s a while since I’ve used one but doesn’t the BBT-7 do the same job

Got a whole Shimano Special Tool set, N16.
It's an old school one, so no tool codes on them.

Nice thanks @DoktorPepe I'll check in with you when we're back to reality

Anyone has a portable CD drive/reader? Need to install a driver, download from manufacturer's site doesn't work... SE1 or SW19 preferably.

Got laptop with me so just need it for a few minutes while it is extracted/read.

Anyone have a tool for the 41mm Shimano external BBs like this? SM-BBR60 is the model
I am in NW10 so would have to be fairly near. I have the one for the slightly larger 44mm type ( thanks to @hamrack ) but there’s an adapter apparently? Or if it can be had cheaply online, I’d buy it, just hate to get it for a one-off...

1 Attachment

In fairness, Most of the newer model external BBs from Shimano that you can buy now will use the smaller diameter interface. You need tool TL-FC25 to use the older tool.
You can still buy some BBs that use the larger size, I think the lower end (Tiagra, Deore) still do.
The new tool would probably get just as much use as any other BB tool.
Only reason I don't have one yet is that I haven't had to fit a newer BB yet!

You can get a cheap plastic adapter on ebay.

https://www.ebay.co.uk/p/1141945382

Not a bike tool, but anyone got a carpet hoover cleaning thing I could borrow for a couple days?

The adaptor comes with each BBR60 or its equivalent. Got loads of them and yeah have a couple going spare if you wanna pop by SE1. Or drop by your friendly bike shop and ask them if they'll spare you one?

Anyone have a 1" crown race setter in north london? Tufnell park and the surrounding areas

Does anyone have an ultra torque BB tool and 10mm long hex for removing and installing a UT bb and chainset, preferably in SE? Ta

Yes. PM me.

an extremely longshot, but does anyone have the SON tools for retrofitting the contact place onto dropouts for the SL dynamo system?

In particular the "Drilling Guide for Contact Plate Holes" and "Mounting Tool for Contact Plate"

Hi folks , anyone in town have a crank extractor for the old French Stronglight cranks - needs to be the 23.35 mm one - so bigger than normal modern ....
Am I allowed to say “ ‘kin awkward French boggers “ .. ?
Only need it briefly to get crank and arm off ..... cheers.

Does anyone have a handle for a cylus seat tube reamer that they might lend me?

Does anybody have a welder they can loan me please? Either a gas/gassless mig, inverter mma or half decent mma. I can pickup, drop off and leave alcohol as payment. Ta

Does anyone have a BB tool and torque wrench I could borrow around peckham either today or tomorrow? Need to get my bike ready for Sunday but the tools I’ve ordered haven’t arrived!

BB tool and torque wrench

I do - in New Cross SE14

But I will force you to buy Champagne!

Anyone have a rotor 3d+ lockring tool, ideally somewhere south east? Will give beer...