You are reading a single comment by @motoko and its replies.
Click here to read the full conversation.
-
What is important to know if if you have a SON SL connection hub or not. My concern is when you say you have no connections, it means it is the special SL hub, which your fork most likely isn't made for.
The SL hub is only for forks which are specially made for it and have the electrical connection plates in the dropouts
Whereas a standard SON hub has two tabs you'll need a pair of 4.8mm spades on the end of the dynamo cable to connect to
motoko
I have a SON hub and B&M lights (IQ-X and toplight mini) in the post. I’ve been told the hub has no connections and is simply just a hub. What do I need to put it all together? On Shimano type hubs there is the plastic snap-fit connector, but believe that’s not the case with SON?