-
Water splashes up under the lip of the countertop, between the sink & the wood.
Any water on top is going to go over the lip, and, absent of any drip groove, leave a whole load of water.
You can wipe up the excess, of course, but unless you dry with hairdrier, there's always going to be dampness, and that's going to lead to mould and rot.
Even if you slap on a load of silicone sealant, that's going to go the same way, and likely exacerbate the problem, as it comes away from the wood and holds moisture against the wood for longer, preventing it from drying out.
At least it's not chipboard & laminate, which is about the only worse surface choice.
[Edit] Also, I just think it's a bollocks choice for a heavily used kitchen. Sure, it looks pretty, but you're not going to want to kneed bread on it, and it's too warm to make puff pastry.
-
Makes sense.
I've had mixed experience; a mate's we lived at where there were issues with the draining section, but not the underside, and my folks which is still flawless. Going to look under the lip of my folks out of curiosity now.
We have chipboard & laminate which is swelling from a cheap SS "on-top" sink. My OH asked how to fix it... errr… replace it.
I've seen you post about this before. So I'm really curious as to what about this design is fundamentally inferior?
Asides from the material choice, to me the issue looks like the tap, not the sink... and to some extent wiping up excess water.
If it was over, then surely you'd have water build up on top where the sink meets the wood? Which would only be solved by wiping up excess water.