Any question answered...

You are reading a single comment by @coventry_eagle and its replies. Click here to read the full conversation.

•

Fyoosh in reply to @gbj_tester

Thanks @mdcc_tester, just gave that a go but still the same noise.

Having a closer look it’s the inside of the chain rubbing against the cog. So that’s a chain line issue? Looks like the chain needs to move like 2mm inward toward the wheel.

So could I add a bigger spacer between the bottom bracket and crank or hub and cog?

Another couple videos and a photo that may or may not help at all:

https://photos.app.goo.gl/pRHYQyyXE9QXy1Z57
https://photos.app.goo.gl/XozxAptEDLCFfMdZA

*can you tell I have no idea what I’m talking about 😕

•

coventry_eagle in reply to @Fyoosh

Did you change something recently? Worn cog? Worn chainring? Bent chain ring?

The chain looks 1/8" and the cog 3/32" so some movement is expected.

Also, chain line seems off, crankset/BB is too long.

•

Fyoosh in reply to @coventry_eagle

Thanks @JurekB

No it just arrived yesterday, brand new, so nothing should be worn and I haven’t changed anything.

Would I have more luck then if I switched the cog to 1/8”? Or if the chain line is off, will the outcome be the same regardless?

About

@coventry_eagle started