Halo Vapour x SP Dynamo Wheel (QR, 6 bolt) / Cinq5 The Plug III USB charger

In Worthing/Brighton, but can post at cost or I am up in London quite a bit.

Wheel - £100
Halo Vapour XC rim, 32h, 29er/700c
Internal width 21mm (I have been using it with Bontrager AW2 32mm tyres, which measure up to 34mm fitted)
handbuilt onto
SP PD-8 dynamo, QR, 6 bolt disc

Rim is currently tubeless taped, with a layer of gorilla tape on top, but happy to remove this if preferred. This wheel has served me faultlessly for 3 years, not even a broken spoke in almost 12,000km.

Cinq5 The Plug III USB charger - £70

Details for this are best found here: https://www.sjscycles.co.uk/dynamos/cinq5-the-plug-iii-hub-dynamo-powered-charging-device/

I've also been running this for 3 years. Off-road it is a bit slow to charge an iphone, but on road or for charging a storage battery it's great. I kept most of the original length of cable by coiling it round the fork leg, there's 90cm from the connector that sits at the top of the steerer to the hub end.

Selling up as I now have a TA set-up and a fork that doesn't accept the Plug.

10 Attachments

PM’d about the charger plug

Might be worth saying what tyre size. Also what width the rim is.

Vapours come in 29 & 27.5 and a few different widths.

edited

Dibs wheel if still available- have sent pm.

Edit - hang on, would want to fit 38m tyres so rim too narrow.

It’s 21mm. More than enough for a 38c

Sorry - laid up in bed / off sick so brain not functioning as it should!

Is the Plug still available, or has it gone?

Plug has gone, wheel still available

Ok, thanks.