You are reading a single comment by @disq and its replies.
Click here to read the full conversation.
-
Yeah I have the syringe etc as well. I've pumped them up to 100psi without issue (I use 80-85 with 25mm tires tho)
For the sealant I switched to Stan's Race, much better than that Doc Blue which never sealed punctures properly.
disq-
Yeah I have the syringe etc as well. I've pumped them up to 100psi without issue (I use 80-85 with 25mm tires tho)
It might just be that I've only tried using them on rims with a very curved cross-section at the spoke holes. I get the impression Milkit valves would work better if the mounting surface is flat.
Brommers
To use the Milkit system to it's full potential you also need the injector/syringe. The injector's good anyway with other valves. I could just never get the valves to seal properly at road tyre pressures.