Threads were pretty clean when it came out, not sure why it was so reluctant to part company.
Anyhoo.
pressure 10bar at the portafilter
18g beans
4 sec until flow / 20 sec extraction
Sette 270 on 15e grind (recommendation is 9e?!)
If I put the Sette on the recommended setting I can't get a flow at all unless I drop the dose to < 12g. To the point where I can't tamp. Seems a bit odd.
Setting depends on how many shims you've fitted also. I haven't fitted any to mine and am normally around 3 or so (this is for a 51mm basket with around 15-16g so not all that comparable. But I wouldn't worry about deviating from the recommended setting.
Threads were pretty clean when it came out, not sure why it was so reluctant to part company.
Anyhoo.
4 sec until flow / 20 sec extraction
Sette 270 on 15e grind (recommendation is 9e?!)
If I put the Sette on the recommended setting I can't get a flow at all unless I drop the dose to < 12g. To the point where I can't tamp. Seems a bit odd.