You are reading a single comment by @Carabo and its replies.
Click here to read the full conversation.
-
Epoxy won't add a lot in the way of structural rigidity 8)
Not a set up I'd personally run... too scared stress will cause sheering on the threaded area.
I'd rather cut the threaded section off and put a steerer extender in (BBB BHP-20)
Carabo
PhilDAS
Yes I'm running a 1 1/8 stem on a 1” threaded long steerer, with a 1” threadless headset and no issues for now sir, probably won't do that on a MTB...
You can always fill the threads with epoxy puddy, sand it out to make it smooth...