Yes that'll do it. I know it seems very obvious but just check the PSU in your PC has a lead with two 4-pin heads spare to run this from.
Edit:
It's also worth checking the power demands as at full draw the card may want more than the molex is rated to supply. I don't know exactly what molex is rated to but IIRC PCIE 6-pin is about 75w, and that card at max is 150W, so as long as it is safe for the other 75W it's all good.
I think I have two spare molex, will investigate tomorrow.
I don't think the current draw is going to be an issue as it's shares between the PCIE slots, the existing 6 pin connector and now another molex to 6 pin connector.
Yes that'll do it. I know it seems very obvious but just check the PSU in your PC has a lead with two 4-pin heads spare to run this from.
Edit:
It's also worth checking the power demands as at full draw the card may want more than the molex is rated to supply. I don't know exactly what molex is rated to but IIRC PCIE 6-pin is about 75w, and that card at max is 150W, so as long as it is safe for the other 75W it's all good.