You are reading a single comment by @yoshy and its replies.
Click here to read the full conversation.
-
my Dolan mudguard set-up.. just drilled the brake bridge and tapped the existing holes in the dropouts
-
The latest in a long line of pre-cursa mudguard bodges:
The material between the two holes I'd 'drilled' in the guard for the seatstay bridge cable-tie had snapped, so I've glued another cable tie there to reinforce the guard for the bridge cable-tie.
Epic dredge, but reading back on this thread so thought I'd share this tutorial on plastic welding. I've used it a number of times from motorbike fairings to fridge bottle shelves. Generally I use heavy duty staples trimmed to size but also copper wire.
M_A_X
hugo7
@yoshy
The latest in a long line of pre-cursa mudguard bodges:
The material between the two holes I'd 'drilled' in the guard for the seatstay bridge cable-tie had snapped, so I've glued another cable tie there to reinforce the guard for the bridge cable-tie.