Specialized carbon cranks, new fulcrum disc wheels, sram force cx1, park tool bearing press, sram rival bits, wheel truing stand and more...

Forgive me for I am a hoarder.....

Collection from Acton west london or I can post,

• Sram force CX1 levers, flat mount calipers and rear mech. SOLD
  Set up for UK brakes but both brake calipers had to be removed in order to remove them from my bike so both will need a full bleed on installation. Will include two new sets of brake pads.
  Rear mech is the 1x long cage rear mech which takes you up to 42t
  Brake hoses are 153cm for the rear and 78cm for the front.
  Asking for £300 for the levers and rear mech as a full set.

  • Specialized carbon fact cranks with praxis 52/36 chainrings. crank arm lengths are 172.5 and spindle is BB30/PF30, not suitable for threadeded 30mm axle conversions. There is a small mark to the driveside crank arm due to storage and I have lost 2 of the 5 chainring bolts which I will replace before sending or buyer collects. Both pedal axle threads are good and comes with the cone adjuster and bearing sheilds. Would be a straight fit on specialized bb30/osbb frames.
    asking £150

  • Fulcrum racing 400 centrelock wheelset,
    Brand new, tubeless ready with centrelock lockrings and standard rim tape. Shimano 11speed fitting with 142x12 and 12x100 axle set ups, these are convertable to QR aswell.
    Asking £150

  • Sram rival 1x HRD shifters alone. The left hand shifter has had a catch removed to allow it to operate a dropper post so the gear mechanism is there but not useable. I bought them on ebay but never got round to actually using them so I am selling as spares or repairs becuase they are untested.
    asking £60 {PROVISIONALLY SOLD, PENDING PAYMENT}

  • Brand new mavic allroad tyres 700x40c tubeless ready, looking for £40 for the pair.

  • Shimano tiagra chainset 170mm crank arms with worn outer chainring.
    Both pedal threads are in good condition just as you can see from the photos the outer chainring is worn.
    Asking £30

  • TRP spyre C post mount brake caliper without brake pads, clear rub marks where there has been some spoke rub,
    asking £15 {SOLD}

  • Park tool HBP-1 hub bearing press tool, pretty much new, I used this less than a handful of times and its a great bit of kit. Due to its lack of use and my most recent car service cost I am looking to sell it.
    Looking for £150

  • Cyclus truing stand
    Well used and needs a clean, but hasnt seen any action in a while... Suitable for most road wheels or wheels with small tyres, not too handy for MTB wheels with tyres on as the arms wont reach around the tyres.
    looking for £70 COLLECTION ONLY.

Everything is postable except for the cyclus truing stand. If you have any questions please feel free to throw them my way.

All pics are here

https://www.dropbox.com/sh/7le10or22qibo0f/AAAKUkxP49ui2gvveyZr_VHKa?dl=0

Cheers

Andre

TRP spyre C please will PM

SOLD to Velosaurus

Hi, does the sram rival hrd have a rear shifter? Is this 10 or 11 speed? Just to confirm there is no calipers included with these? The gear mechanism is only removed from the front mech shifter(left)? Thanks

Hi,

Yes it has an 11 speed rear shifter which works. No calipers or hoses are included with the shifters.

Cheers
Andre

i am up for those mavic allroad tyres

No worries! have PM'd you