You are reading a single comment by @miloas and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
svenhöek
dancing james
@miloas
Got a pair of sram red hrd shifters to force flat mount callipers. Having a nightmare bleeding the system.
I've passed oil back and forth between the stringers with the brake Lever open. I'll then clamp the Lever closed with a rubber band, lock off the Lever syringe and pull out on the Calliper syringe and I'm pulling so many bubbles out. Yet when I open the syringe up I can move the brake fluid from one syringe to the other with no issues /bubbles. As soon as I close the Lever the bubbles appear.
Any advice?
Edit** for anyone who had a similar problem - i think I must've been pulling air through the connection between the calliper and syringe.
The overarching issue was that when i squeezed the brake lever, it was going all the way to the handlebar but It wouldn't stop the wheel or engage with the disc properly. I removed the bleed block and moved the pistons in a little bit, then did it all again and now it's fine. Relief!