You are reading a single comment by @grams and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
dots
@grams
The bricks at A look like thingies that go into tool-free wire crimp connectors on the rear light. Basically you shove the bare wires through the hole, then shove the plastic bit into a hole on the rear light. Rear lights that use this system usually also have standard spade connectors too. You can use either.
If your rear light cable already has plugs on the other end, you can probably reverse it and use the plugs to connect to the head light and use the tool-free connectors on the rear light for the bare ends. That would save messing about with crimps and heat shrink.