You are reading a single comment by @Lolo and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Lolo
leggy_blonde
A bit late to this thread but I had Richard Hallett build me a stainless track bike in time for the National Madison champs in 2016. I chose him because he was taught by Cliff Shrubb who made my previous frame and he's a proper engineer; we spent a lot of time going through each tube to make the bike as stiff and aero as possible.
http://www.halletthandbuiltcycles.com/track.html
It's mostly Reynolds high polish 953 with a Columbus tapered headtube (those 44mm would look out of place) and XCR chain stays as 953 didn't come in a taper I wanted. Forks are Alpina DF4 and the paint is by Colourtech with masked out "decals".
Components have changed a bit over time and various wheels get used but I've tried to go with a made in Britain theme so Hope headset and seatpost, Fibrelyte chainrings, Goldtech hubs and Royce BB.
I got my Cliff Shrubb in 2002 and similarly I still expect to be racing the Hallett in 10 years, it's already been crashed and dented!