-
Now lets have a long discussion about caliper pins and brake pads. ;)
What brake system, tokico, nissin meh. How is the pin held in place.
Having been through this shite with MK1 MR2 rear calipers and bindit front calipers. There are a few differing types.
Ceratec was made as copper grease (metal/magnetic content) can affect abs sensors. Ceratec has no metallic/magnetic content.
lynx-
Stock Nissin callipers from an air-cooled Triumph twin.
If we are going to get into a grease discussion, please can every product mentioned be readily available from a UK internet retailer?
The outcome from the last brake pad discussion was buy a pair only available from foreign websites with a total cost inc. P&P that was on par with buying a new set of callipers. So I just bought a set of EBC for £14-20.
hugo7
I use cera tec, can get it at most motor factors, about £6 a tube which will prob last long enough to loose it before it runs out. Also yamalube lical is a high enough temp waterproof grease designed for outboard motor applications, i use it for head bearings, esp where the frame gets hot (oil in frame bikes).