You are reading a single comment by @MCamb and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
MCamb
TTM
Cross posting from a thread I started in case anyone can shed some light.
@mdcc_tester ?
I’ve got an issue with my rear wheel that I’m hoping someone can help me with.
It’s a DT Swiss 3 pawl disc hub on a R24 wheel. The problem started about a month ago when I noticed the chain would occasionally bunch up when free wheeling. It got a bit worse, so I did a hub service and cleaned and re greased everything. I also replaced the pawls. The cartridge bearings were smooth and the wheel spins on the axle without any issue. However when I tighten down the quick release the sticking starts again, so this seems to be the issue. If I leave the quick release as loose as I dare, the wheel is just about rideable, but still sticks a bit and isn’t ideal.
Can someone advise what the problem might be?