You are reading a single comment by @yoshy and its replies. Click here to read the full conversation.
  • Ordered 10 x DS18B20 from China (due in a month or so by slow post) but cheap (under £5 inc P&P).

    Also ordered three DHT22's to check how accurate they are for temp/humidity monitoring.

    Plan is to have a DHT22 in each room (2 bedrooms, study, lounge, hall, kitchen, toilet, bathroom, communal hall, outside) and a DS18B20 ziptied to a radiator pipe in each room to monitor heating.

    Also looking for a 1-wire barometric pressure sensor, CO2 sensors for the bedrooms and a CO sensor for the kitchen.

    50m reel of alarm cable (and I can use the existing alarm cable in the flat to get to some of the rooms already) to bring it all back to a Raspberry Pi to do the data capture and logging.

    Will also look to get a photodiode sensor on the electricity meter blinkenlight (which apparently blinks as every thousandth of a unit is used). Wonder if gas meter does the same...?

    All for shits and giggles with total spend probably under £50 if I can keep it that way.

  • Will also look to get a photodiode sensor on the electricity meter blinkenlight (which apparently blinks as every thousandth of a unit is used). Wonder if gas meter does the same...?

    Coooool

About

Avatar for yoshy @yoshy started