-
So keep the fore/aft adjustability? Makes it simpler for sure. I was also thinking a brace/bridge on the NDS side for disc braking forces. Not sure if needed, but I've seen it done.
-
I did it the same way as @Batt- the only issue I found is that the hanger insert moves the mech about 5mm outboard so it takes some extra fiddling to index for the granny gear.
Also it's a complete pain in the arse to change a tube. Unlike Batt's I use SKS front mudguard stays for the rear guard, so they can pop out without having to undo the bolts.
-
Yes, when I used to commute with mudguards on this bike it was a total arseache.
I'm leaning towards the most simple solution (or one of), which is to weld on a hanger like this if I can find one. Different dropout but you get the idea:
-
All yours (cc. @Simba )
I don't think they'll be quite right for my needs.
-
I should probably make a CP thread for this, but I just wanted to share something. There's a thread on here called "anyone know anything about disc brakes?" and the answer in my case is "fuck no".
I just learned that rear disc (road) spacing is 135mm. Who knew?
-
Picked up a v4 raw pompino yesterday. Plan is to race it sscx. Have to change a few things, such as gearing (planning on 38/18) maybe brakes (unbranded v brakes atm) and tyres. Does anyone know of any 24h 120 OLD rear hubs if I wanted to build up a set of tub wheels for it?
1 Attachment
-
-
I am looking for a geometry chart for a Pomp V4, but can’t find it. (Google is normally my friend, but not in this case...)
Does anyone have one at hand or know where to find it? (It has to be V4) -
.
-
Perfect, thanks!
-
Anyone interested in a Medium Pomp? Pretty much ready to roll.
1 Attachment
-
-
I think I've already burned Rodolfo because I'm incapable of posting :(
It was a lot of effort to get it out of the basement tbh. So it's safe to say it's London pickup only. I have a set of wheels to go with it too, basically a whole bike. I bought the whole thing for £250, replaced some bearings, wheel freehub, and cables. So I think for the whole bike £230 is reasonable. And I have chaintugs. Rear is respaced to 130mm.
I'd probably split if really necessary.
Photos: https://photos.app.goo.gl/u6NqmYDjEjF1Kv1p7
Will make a proper ad soon if no bites here.
-
^ That pomp is well-priced and @pastry_bot is a good mechanic so when he says it's ready to roll it is.
edit: slow clap for my new page fail
fizzy.bleach
Hulsroy
Spxtz
Simba
🅑🅐🅣🅣
sbbohr
lennymc
user103444
pastry_bot
B0N0R
Cupcakes
aka
youramericanlover-
Post a reply
About
On One Pompino owners...
Posted by
Well. I would just coldest the stays and weld on mech hanger and disc tab. Og maybe bolt on mech hanger a la Hunters dropouts.