I didn't hear it pop but it seems to have taken its place.
If you tape it edge to edge, then it's likely you may not hear the bead popping in place.
Make sure you didn't tighten the valve too much; this is usually the main cause of tyres deflating (if the tyres and rims are fine).
Thanks for the tip as I wouldn't have thought of that but now you point it out it makes sense. Anyway, with more sealant it then worked and I went for a ride this morning and all good so going to attempt the front wheel now 👍
@M4xime started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
If you tape it edge to edge, then it's likely you may not hear the bead popping in place.
Make sure you didn't tighten the valve too much; this is usually the main cause of tyres deflating (if the tyres and rims are fine).