Tubeless Tyres -"saying the same things about tubeless tyres over and over again" Hippy read the first f**king post

You are reading a single comment by @cycleclinic and its replies. Click here to read the full conversation.

•

stelfox
The decathalon kit I have is shit. Recommend me please a tubeless repair kit?

So this post has more value. The reasons it it shit
1. For the cut I had, in the tread, the larger worms were too big to fit in doubled in. I eventually pushed one end in which stopped it up. I couldn’t cut it though, and it came out about 1km later. Did another one and borrow some scissors from a dry cleaner.
2. The tool for inserting was pretty small to be pushing the worm into.

•

cycleclinic in reply to @stelfox

Maxalami kit. However the plug should always be larger the the hole you are fitting or you will require more than one plug. Your plug pushed out because it may actually be shit but it may actually not be shit but probably because it was too small for the hole. Yes you will make the hole bigger but that what you have to get your head around. Sadly your blaming the kit when you did not use it properly.

Also with plug never infalte to full pressure immediatley. Inflate with a hand pump to a pressure where the plug is not pushing out. After 24hrs try a higher pressure. Also carry a blade to cut doen the fat plugs so they dont catch.

About

Avatar for cycleclinic @cycleclinic started