-
Don't be embarrassed I've seen plenty of pros do much worse. As long as the framing is plumb, square and strong enough to do its job it doesn't need to be pretty because at the end of the day you're going to be covering it with wediboard and tiles (or something similar). No one will see it so you're much better focusing your efforts on making the finished product look good rather than the few bits of timber that hold it all up
Bobbo-
That’s reassuring I suppose!
On the subject of wediboard, I have a 2600 x 1200 x 12.5 panel I need to make long straight cuts on with minimal waste... What’s the best way? I was thinking carbide scoring knife along a long spirit level but I’m not sure how neat that will end up. I’ve seen youtubers using craft knives and handheld circular saws (which I have) but I’m not convinced I can keep the line straight for the full length of the board (and also not fuck up the floor underneath).
Dramatic_Hammer
Ah yeah, I nearly attached the face on pic to the original but my plywood depth bodge is mildly embarrassing!