I'd get the tensionmeter out and just check
Doubt that the bearings will make any noise but all the mack front hubs develop play as the spokes in tension pull on the flange and enlarge the bearing bore.
And the bore then closes up again when the flange breaks.
Could be. Never seen any at that point of its lifespan. Not great hubs in any case
@Brommers started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
I'd get the tensionmeter out and just check
Doubt that the bearings will make any noise but all the mack front hubs develop play as the spokes in tension pull on the flange and enlarge the bearing bore.