You are reading a single comment by @Mr_Sworld and its replies. Click here to read the full conversation.
  • Stoopid question, once you have 'glued' solvent weld drain pipe it is not coming apart without a great deal of work.

    Someone installed a flexi loo connector that has failed (is leaking at the concertina) so straight replacment isn't possible

    Edit - Angle grinder and being very careful. I hate clueless diy wankers.
    Also dealing with other peoples poo is fucking disgusting.

  • Edit - Angle grinder and being very careful. I hate clueless diy wankers.

    You used a angle grinder on a plastic pipe? FFS use a saw and avoid all the hot work permits.

  • Didn't have any decent saw blades, the two i had had snapped. Was using a disc for plastic.

    Not solvent welded these pipes, have but them together and sanitary silicone so any future issues unbolt the toilet and all can be pulled apart. Wish I had some fernox stuff but..

About

Avatar for Mr_Sworld @Mr_Sworld started