You are reading a single comment by @Tijs and its replies. Click here to read the full conversation.
  • Will my Sora FD work with my 48/38/28 crankset?

    Which Sora? FD-3503 is designed for 50-39-30, so it should handle 48-38-28 OK as long as moving it down 4mm doesn't get you into chainstay interference territory.

    Which Deore? There must be a hundred Deore FDs, many designed for much smaller MTB rings, but some specifically designed for touring bikes with 48T big rings.

    Which clamp size? A slightly short BB might work with a 28.6mm clamp because the whole FD alignment varies a bit between clamp sizes, so the skinny tube variant has more minus tolerance on the chain line than the fat tube versions.

  • Sora FD-3503, yes. Have cabled it up with that, will see if it works.

    Deore one I'm not sure. Looks very similar to this:

    My frame is old school steel, so I guess 28.6mm clamp diameter? Deore one is 34.8mm unfortunately.

    Thank you for your response.

About

Avatar for Tijs @Tijs started