You are reading a single comment by @branwen and its replies. Click here to read the full conversation.
  • Yep, switch fine thankfully. So cut the rubber away for better/cleaner access and contact point. One piece sugru job or perhaps a bit on the button to set overnight then another bit which will see the whole and press against (the set sugru on) the switch? Cheers

  • I fixed a similar issue with a Bryton GPS using the pin from a single speed chain. Put it in the slot, then filled around it with glue although I would do it with suguru now.

  • Yep; that's the one, a little prong of sorts touching ,or as near as I can get to touching, the button then sugru it in place sealing the hole at the same time.
    Will let you know how I get on!

About

Avatar for branwen @branwen started