You are reading a single comment by @matteroftaste and its replies.
Click here to read the full conversation.
-
I used normal plastic rim tape plus a couple of passes of electrical tape. Then installed a couple of these http://skinnystripper.com pushing them into the bed. Valve in, a spritz of water to help the tyre glide over the latex and into the rim, tires on and inflated with a track pump. It’s worth noting I had the tires on the wheels with tubes inflated to maximum pressure for five days prior to installation to push out any kinks in the bead.
matteroftaste
Easy to setup? I used Tesa but it was hard to get smooth, not sticky like gorilla tape, and probably too wide in my case.