-
Fixing your own cars is great, its satisfying and will save you a Ton of money. If you have ever had the experience of working in a garage (i have and it was a main dealer) you will soon realise you are paying £75 p/h for some real animals to work on your car.
In terms of your current job in hand it depends on what clamps you are using - if you are using Jubilee clips buy decent ones, the cheap ones are crap. If you are getting them from BMW they will probably be the correct size for the job. I don't know much about BMWs so not sure what type they use but you may need some sort of crimp tool.
You shouldn't find there to be a massive need to sand down any pipes, just a clean up should be sufficient. Don't over tighten any plastic housings, you should be able to find torque settings online. There is probably some sort of breather screw up near the heat exchanger to assist filling the cooling system fully.
Remember google/youtube is your friend, you will sometimes get mega pissed off with Rusty old bolts, you will cut and bang your hands regularly, you will be laying under a filthy old car trying to squeeze your hand into tiny gaps, you'll sometimes be at breaking point trying to reline up a steering control arm, you'll always need an additional part but the shops are all now closed, you will ache like shit the next day (maybe thats just me) but once its all over and you can stand back and think you have saved a few hundred quid its all worth it.
Its also worth getting yourself a Manufacturer specific Code reader, really handy bit of kit for around £30.
I am about to take a huge leap (for me at least) as I am about to start working on my car myself as I want to learn to fix and maintain it myself and really want to start learning about practical mechanics (I only know the theory for now if it makes sense).
The first thing I am about to do is replacing all the hoses and clamps (and some of the housings bolted to the block) of the cooling system on my E30 ; found an exploded view and ordered all of the relevant parts directly on BMW classic website (very useful by the way), and waiting for a jack and jackstands to arrive.
Just to know, it might be a dumb question, but is there any specific thing to know when fitting clamps and rubber hoses, like about tightness for example? I believe there shouldn't be too tight to damage the rubber of the hose, but how tight then?
I also assume that cleaning the surface on which the hoses fit is required, what can be used for that? Sandpaper, metallic brush (when in fitting is aluminium), etc.?
I will of course empty the coolant etc.
Any particular comment would be appreciated :) thanks in advance!