You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@M_V
Adding my modded Genesis Flyer.
Mods are rear cable routing removed and rear brake bridge removed and replaced by upside down cross. It’s actually stainless under the powder so could be stripped and polished.
I also had at the driveside chainstay with a hammer so as to clear the back of the spider on road cranks. This is definitely not the neatest of work but I did it years ago so it’s sound and the powder coat hides it well actually.
Powdercoat was done a few years ago now so there are marks here and there. Little bit of corrosion around the chainstays bridge and on the track ends. The powdercoat has also chipped a bit around the edges of the bottom bracket. None of that is structural though, there’s plenty life in this frame yet.
Toptube 57cm centre to centre.
Seattube 56cm centre to centre, 60cm centre to top.
Headtube 165mm.
£75.
5 Attachments