All BSA threads
Mismatched groupset but all works well.
I serviced it for a ride to Brighton, it works very well.
The frame is from a (now defunct) french "vélociste" called Bouvatier Cycles in Malaunay BOUVATIER CYCLES, which started in 1982 and closed in 2001. Address was 48 Cite Clair Soleil - 76770 Malaunay
I can't say if it was built in house or imported from Italy like many were at the time. All threads are BSA.
Made/ordered by Cycles Bouvatier in France, near Rouen in Normandy. Pretty sure it is fillet brazed.
Dura-Ace headset set
Sachs New Success gearset
Shimano RX100 brakes & 1055 chainset
Wheels are visually paired clinchers but mismatched - Dura Ace first generation rear hub and Campagnolo front. New Schwalbe Lugano gumwall tyres in 700c x 25mm New bar tape and cables
The only thing that lets it down is the seatpost bolt which is not the correct one.
I also have a silver 27.2mm seatpost which I will swap or include in the sale.
Is @Ndeipi and the OP @lcf01 the same person?
I have a 60cm Columbus SLX New full bike.
All BSA threads
Mismatched groupset but all works well.
I serviced it for a ride to Brighton, it works very well.
The frame is from a (now defunct) french "vélociste" called Bouvatier Cycles in Malaunay BOUVATIER CYCLES, which started in 1982 and closed in 2001. Address was 48 Cite Clair Soleil - 76770 Malaunay
I can't say if it was built in house or imported from Italy like many were at the time. All threads are BSA.
Made/ordered by Cycles Bouvatier in France, near Rouen in Normandy. Pretty sure it is fillet brazed.
Dura-Ace headset set
Sachs New Success gearset
Shimano RX100 brakes & 1055 chainset
Wheels are visually paired clinchers but mismatched - Dura Ace first generation rear hub and Campagnolo front.
New Schwalbe Lugano gumwall tyres in 700c x 25mm
New bar tape and cables
The only thing that lets it down is the seatpost bolt which is not the correct one.
I also have a silver 27.2mm seatpost which I will swap or include in the sale.
I am after £300 for the full bike